Erosion Control Blanket
Installation Guide
Slope Installation
1. Preparation
-
Clear the Site: Remove any large debris, rocks, and vegetation from the area.
-
Check Soil: Ensure the soil is firm and compacted. If necessary, grade the slope for an even surface.
2. Installing the Blankets
-
Position the First Blanket: Start at the top of the slope and unroll the blanket downhill. Make sure the blanket overlaps the previous one by about 3-6 inches.
-
Lay the Blankets Flat: Ensure the blanket is flat and taut with no wrinkles. It should follow the contour of the slope.
-
Secure the Blanket: Use stakes or U-shaped pins to secure the blanket to the ground. Install them every 2 feet along the edges and at 3-foot intervals across the blanket. Use a stake pattern recommendation below depending on the slope:
-
Ensure the stakes are driven at a 45-degree angle to hold the blanket in place.
-
Overlap Edges: Overlap the edges of the blankets to prevent water from eroding beneath the blanket. Ensure proper alignment between sections.
-
Anchor the Blanket at the Top and Bottom: Secure the top and bottom edges more frequently (every 6-12 inches) to prevent the blanket from shifting during weather events.
3. Seam and Edge Treatment
-
Edge Stakes: Along the edges of the blanket, place stakes every 6 inches to ensure no lifting or sagging occurs.
-
Slope Transitions: In areas where the slope transitions, ensure the blanket maintains proper alignment and is securely anchored to prevent slippage.
4. Final Check
-
Smooth Overlaps: Double-check overlaps and edges for coverage. Ensure no soil is exposed.
-
Check for Secure Fastening: Ensure all stakes are in place and that the blanket is securely held against the wind and water flow.
-
Water the Area: If applicable, water the area lightly to help settle the blanket and promote seedling growth if a seed mix is used with the blanket.
5. Maintenance
-
Regular Inspections: Check periodically for signs of shifting or damage, especially after rainstorms or strong winds. Repair or replace damaged sections as needed.
More.
> Browse Blankets
> Download .pdf
Contact Us.
If you have any additions questions about our curtains and the install, you can contact us:
-
By visiting this page on our website: www.bmpsupplies.com/contact-us
-
By phone number: 1.855.422.0066
Disclaimer
Last updated: February 25, 2025
The information provided herein is offered without charge or obligation, and it is essential for the recipient to consult with qualified engineering or environmental professionals for each specific job. While we strive to provide accurate and reliable information, the conditions of use and handling may vary and are beyond our control. Therefore, we cannot guarantee the accuracy or reliability of this information or the performance of any product. The specifications, properties, and applications discussed here are intended for informational purposes only and do not alter, amend, enlarge, or create any warranty. We strongly advise seeking guidance from qualified engineering or environmental professionals to ensure appropriate and accurate implementation for each unique situation. It is important to note that nothing contained herein should be construed as permission or a recommendation to infringe any patent.